Cortical Bone Screws 2.0mm Diameter - Self Tapping Stainless Steel:

• 6mm - 38mm in length.
• Screw diameter 2.0mm
• Core diameter 1.3mm
• Head diameter 4.0mm

Use the following drill bits, taps and screwdrivers:

• Use 1.5mm pilot hole.
• Use 2.0mm clearance hole.
• Use 2.0 mm tap. (Depending on the hardness of the bone, a tap may not be needed as the thread diameter is not a lot greater than the pilot hole.)
• Use 1.5mm hex head screwdriver.