Cortical Bone Screws 2.0mm Diameter - Self Tapping Stainless Steel:
- 6mm - 38mm in length.
- Screw diameter 2.0mm
- Core diameter 1.3mm
- Head diameter 4.0mm
Use the following drill bits, taps and screwdrivers:
- Use 1.5mm pilot hole.
- Use 2.0mm clearance hole.
- Use 2.0 mm tap. (Depending on the hardness of the bone, a tap may not be needed as the thread diameter is not a lot greater than the pilot hole.)
- Use 1.5mm hex head screwdriver.