Cortical Bone Screws 1.5mm Diameter - Self Tap Stainless Steel:
- 6mm - 20mm in length.
- Screw diameter 1.5mm
- Core diameter 1.0mm
- Head diameter 3.0mm
Use the following drill bits, taps and screwdrivers:
- Use 1.1mm pilot hole.
- Use 1.5mm clearance hole.
- Use 1.5 mm tap. (Depending on the hardness of the bone, a tap may not be needed as the thread diameter is not a lot greater than the pilot hole.)
- Use 1.5mm hex head screwdriver.