Cortical Bone Screws 1.5mm Diameter - Self Tap Stainless Steel:

• 6mm - 20mm in length.
• Screw diameter 1.5mm
• Core diameter 1.0mm
• Head diameter 3.0mm

Use the following drill bits, taps and screwdrivers:

• Use 1.1mm pilot hole.
• Use 1.5mm clearance hole.
• Use 1.5 mm tap. (Depending on the hardness of the bone, a tap may not be needed as the thread diameter is not a lot greater than the pilot hole.)
• Use 1.5mm hex head screwdriver.