The Anitek M300 Syringe Pump is the new and improved pump replacing the M200A model.
A fixed capacity pump that delivers drugs in a specific time, without being effected by resistance inside the infusion tube.
Working modes -
Rate mode, Time mode, Weight mode, Interval mode, Ramp mode, Sequential mode, Micro mode, TIVA mode, First dose mode
The Anitek M300 Syringe Pump has the following features:
-
Suitable for 5ml, 10ml, 20ml, 30ml & 50/60ml syringes.
-
Precise pressure monitoring system displays real time, dynamic changes in the syringe line pressure.
-
Reliable pushrod combination, ensures safe operation of the syringe & avoids potential dangers.
-
Clamp, on rear of unit for attaching to pole.
-
Portable design makes it convenient & sturdy.
SPECIFICATIONS
Dimensions: 300mm×145mm×130mm
Net weight: 2 Kg
Screen Size: 4.3” touch
Resolution: 480 × 272
Speed: 50/60ml syringe: 0.1ml/h~2200ml/h
30ml syringe: 0.1ml/h~1200ml/h
20ml syringe: 0.1ml/h~600ml/h
10ml syringe: 0.1ml/h~300ml/h
5ml syringe: 0.1ml/h~100ml/h
All syringe sizes have 0.1ml/h step increments in flow rate
Accuracy (according to injection rate):
≤1.00ml/h ≤±5%
1.00~2200.00ml/h ≤±2%
Alarms available:
Blocking alarm, no-operation alarm, Will Complete alarm, emptying alarm, completion alarm, syringe off alarm, push rod error alarm, battery low alarm, system error alarm, power line off alarm, battery exhausted Alarm, main motor speed abnormal alarm, main motor direction abnormal alarm, main motor from drive detection direction abnormal alarm, main motor slave drive detection speed abnormal alarm, slave drive 24V power supply abnormal alarm, slave drive communication abnormal alarm, KVO complete, board Communication error, battery not connected.
Power supply:
AC220V, 50Hz; in-built battery DC11.1V rechargeable lithium battery; the fully charged battery can sustain the pump operation for more than 3 hours at the speed of 5ml/h (specified by EN 60601-2-24:1998 standard).